Electric water heater FLORYDA over-basin

Technical information:

• Mounting method: vertical installation (bottom connection)
• Assembly kit included
• Rated voltage and frequency 230V-50Hz
• Rated power: 2000 watts
• Thermostat control range: 25°C-75°C
• Thermostat control with a knob
• Thermal shutdown temperature: 93°C ± 3°C
• Warm-up indicator
• Power indicator
• Power cord 150cm with European plug
• Magnesium anode ø15x135mm
• Heater material: stainless steel SS840
• Internal tank material: cold-rolled steel
• Inner tank wall thickness: 1.8mm
• Coverage of the inner tank: enameled
• Minimum enamel thickness: 0.35mm
• Housing color: white
• Insulation material: polyurethane
• Insulation thickness: 20mm
• Protection class: IPX4
• Safety valve: 0.6MPa
• Warranty on the inner tank: 3 years
• Warranty on electrical components: 2 years

Additional information: 

1. Electric water heater must not be turned on, when it is not fully filled with water.
2. Do not pull the plug from the socket with wet hands.
3. Remember that hot water can cause burns. Adjust the temperature of the water before using it or use the appropriate safeguards.
4. If the heater will not be used for a long time, disconnect the power supply.
5. Remember to replace the magnesium anode regularly.
6. Check the operation of the safety valve every 7 days.
7. In case of leakage, immediately disconnect the device from the power supply.