Designed for wireless control of electrothermal actuators normally open (NO) or normally closed (NC) with two-position regulation, mounted on the floor manifold. It is also designed to control the central heating pump incorporated in the distributor system (the central heating pump is switched off if all channels are off).
It maintains independent temperatures in individual rooms by means of regulators.
It can work with 6 wireless room regulators and 6 thermoelectric heads and a central heating pump. (Regulators are designed to maintain an appropriate temperature in the room. After exceeding the set temperature, the regulator sends a signal causing the actuator to close. The actuator will be reopened when the temperature drops below the set temperature on the regulator.)
If there are several heating circuits in a given room, it is recommended to connect one
| Device controlled | valve actuators, pump and central heating boiler |
| Supply voltage | 230 V 50 Hz |
| Maximum load (sum) | 3 A 230 V 50 Hz |
| Maximum power consumption | 1,2 W |
| The supply voltage of the actuators | 230 V 50 Hz |
| Type of actuators supported | electrothermal – normally open (NO) or normally closed (NC) |
| Visual signaling | LED diodes |
| Working temperature | 5°C – 40°C |
| Storage temperature | 0°C – 65°C |
| Protection class | IP 40, II protection class |
| Colour | white |
| Mounting method | wall mounting, expansion pins or DIN rail |
| Weight of the module with the power cord | 577 g |
| Standards, approvals, certificates | compliance with R & TTE and ROHS directives |
| Warranty period | 2 years |
| Dimensions (width/height/depth) mm | 270/97/50 |
| Set includes | T6RX module with power cord, expansion pins, manual |
Reviews
There are no reviews yet.